The electric sunshade requires electrical wiring; as the procedure is somewhat complex, it is recommended to disconnect the vehicle's power supply before proceeding to prevent short circuits.
1. Preparation and Removal: Fold down the rear seats to create working space, then carefully use a pry tool to remove the roof trim seals, taking care to avoid damaging the interior upholstery.
2. Wiring and Routing: Route the wiring harness from the pre-drilled access hole on the left side of the trunk area up toward the sunroof vicinity; the harness must be tucked securely beneath the trim seals and properly insulated.
3. Mounting and Connection: Position the motor with its front facing forward, secure the sunshade mounting screws, and connect the wiring to the taillight assembly's connector; finally, reinstall the trim seals and return the seats to their upright position.
4. Functional Testing: Start the vehicle and test the opening and closing operation via the central control screen or the physical control buttons to ensure smooth movement, free of any jamming or abnormal noises.
